22
•
INPUT1 / INPUT2
LEDs
o
Permanently ON: IN1 or IN2 is selected, and its incoming audio signal is
sent via WiSpeak wireless audio transmission to the receivers’ network
.
Short-press the SELECT key to modify the input selection
o
Blinking (gain adjust mode): when IN1 or IN2 is selected (its LED is in fixed
ON condition), a long press (> 5 seconds) of the SELECT key will get the
unit into gain adjust mode. Rotate the front panel knob to adjust an input’s
gain:
▪
IN1 gain: 14 steps, each one increasing or decreasing with each
knob’s rotation step
▪
IN2 gain: 5 steps, each one increasing or decreasing with each
knob’s rotation step
A short press on SELECT key will exit the gain adjust mode.
•
BLUETOOTH
®
LED
o
Permanently ON: the Bluetooth
®
input is selected, and
there is an external
device
(smartphone, tablet, computer, audio player, etc.)
connected to the
CORE unit for audio transmission
(A2DP). If a valid media is played in this
external device and transmitted via Bluetooth®, it will be received by the
CORE unit and sent via WiSpeak wireless audio transmission to the
r
eceivers’ network
o
Blinking: the Bluetooth® input is selected, but
there is
NOT
an external
device
(smartphone, tablet, computer, audio player, etc.)
connected to the
CORE unit for audio transmission
(A2DP). Therefore, even the
Bluetooth® input is selected in the CORE unit, no audio will be received
via Bluetooth® by the CORE unit, thus not sent via WiSpeak wireless
audio transmi
ssion to the receivers’ network
