Ecler WiSpeak TUBE, Руководство пользователя, Страница: 68 / 79

68
The next information shown in each line is the receiver unit Alias, or customisable name.
By default, each receiver unit has an Alias which starts with its model name, followed by
-XX where XX matches the last 2 digits of its MAC address:
In the above example we can see the unit is a TUBE model, with a MAC address that
finishes at 59 .
To the right of the Alias there is an indication of the individual loudspeaker volume for
each unit, from 0 to 100, as each unit can be adjusted with a different playback volume:
At the bottom of this page the DISCOVER AND LINK button is shown. As explained in
chapter 4, it can be used to make the initial pairing of the full batch of receivers in an
installation. But it can also be used after it, in a future action that will scan for more
available receivers and, if any, will add them to the already paired loudspeakers list, up
to a maximum of 24 units. Very useful at a running installation, when adding more
receivers is necessary, or when replacing units is required.