12
Mana
4.6
LAN Connection
1.
Connect a network cable with RJ-45 connector into the LAN 1 or LAN 2
port of
Base UnitVEO-SWC44.
2.
Connect the other side to LAN.
DHCP on the VEO-SWC44 switcher is enabled per
default.
a)
If there’s a DHCP server in the network, IP address will be assigned
automatically.
b)
If there is no DHCP server in the network, VEO-SWC44 will require to
manually configure a static IP address.
For further information, see chapter
If the LAN Ethernet switcher supports PoE
(Power over Ethernet),
LAN 2 port of
the VEO-SWC44 allows to power the switcher
instead of using the external power
adapter included.
Wireless Direct Mode is enabled by default. In this network mode, VEO-SWC44
generates its own wireless SSID
with IP address 192.168.43.1. For further information
on how to properly configure the network settings according to the needs of the
application.
The LAN connection can be used for
:
•
Network integration of VEO-SWC44 in guest or company network.
•
Telnet control the VEO-SWC44.
•
Maintenance purpose.
•
Over-The-Air -Update (OTA) of firmware of VEO-SWC44.