Ecler PAM1400, Руководство по обслуживанию

Страница: 20 / 183

17
STANDBY MONOSTABLE
The only thing left is the function of the monostable made of IC310 (4538).
Like the counter and the monostable IC311 (4538), this circuit is connected to the PROTECT SIGNAL, too. Its
output is "1" in rest state and becomes "0" during an approximate time of 1.3 seconds, which is given by the constant
RC of the circuit R341 C316.
This leads to two situations: First, putting a "0" in one of the legs of the NAND (IC308) generates the
immediate opening the relay, as we have seen before. On the other hand the voltage divider of the DC OUT circuit is
put off balance. The monostable time is calculated to be long enough to unload the capacities of C312 and C313. This
way we get a DC OUT circuit initialization as we had done a manual reset (disconnection from mains), causing the
tipical turn-on STANDBY time for each of the disconnections of the relays because of the protections shooting. Let's
take into account that the system is locked after the fifth disconnection.