background image

 

 

9.

 

Do not defeat the safety purpose of the polarized or grounding type plug. A 

polarized plug has two blades with one wider than the other. A grounding 

type plug has two blades and a third grounding prong. The wide blade or 

the third prong are provided for your safety. If the provided plug does not 

fit into your outlet, consult an electrician for replacement of the obsolete 

outlet. 

10.

 

Protect the power cord from being walked on or pinched particularly at the 

plugs, convenience receptacles, and at the point where they exit from the 

apparatus. 

11.

 

Only use attachments/accessories specified by the manufacturer. 

12.

 

Unplug the apparatus during lightening sorts or when unused for long 

periods of time. 

13.

 

Refer all servicing to qualified personnel. Servicing is required when the 

apparatus has been damaged in any way, such as power supply cord or plug 

is damaged, liquid has been spilled or objects have fallen into the apparatus, 

the apparatus has been exposed to rain or moisture, does not operate 

normally, or has been dropped.

 

14.

 

Disconnecting from mains: Switching off the POWER switch all the 

functions and light indicators of the amplifier will be stopped, but fully 

disconnecting the device from mains is done unplugging the power cord 

from the mains input socket. For this reason, it always shall remain readily 

operable. 

15.

 

Equipment is connected to a socket-outlet with earthing connection by 

means of a power cord. 

16.

 

The marking information is located at the bottom of apparatus. 

17.

 

The apparatus shall not be exposed to dripping or splashing and that no 

objects filled with liquids, such as vases, shall be placed on apparatus. 

 

NOTE:

 This equipment has been tested and found to comply with the limits for a Class 

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference when the equipment is 
operated in a commercial environment. This equipment generates, uses, and can 
radiate radio frequency energy and, if not installed and used in accordance with the 
instruction manual, may cause harmful interference to radio communications. 
Operation of this equipment  in a residential area is likely to cause harmful 
interference in which case the user will be required to correct the interference at his 
own expense.  

 

WARNING:

 

This product must not be discarded, under any circumstance, 

as unsorted urban waste. Take to the nearest electrical and electronic 

waste treatment centre. 

 

NEEC AUDIO BARCELONA, S.L. 

accepts no liability for any damage that may be 

caused to people, animal or objects due to failure to comply with the warnings 
above. 

Содержание IC Series












Отзывы: