background image

 

 

8.

 

Do not install near any heat sources such as radiators, heat registers, stoves, 
or other apparatus (including amplifiers) that produce heat. 

 

9.

 

Do not defeat the safety purpose of the polarized or grounding type plug. A 

polarized  plug  has  two  blades  with  one  wider  than  the  other.  A  grounding 
type plug has two blades and a third grounding prong. The wide blade or the 

third prong are provided for your safety. If the provided plug does not fit into 

your outlet, consult an electrician for replacement of the obsolete outlet. 

10.

 

Protect the power cord from being walked on or pinched particularly at the 
plugs,  convenience  receptacles,  and  at  the  point  where  they  exit  from  the 

apparatus. 

11.

 

Only use attachments/accessories specified by the manufacturer. 

12.

 

Unplug  the  apparatus  during  lightening  sorts  or  when  unused  for  long 

periods of time. 

13.

 

Refer  all  servicing  to  qualified  personnel.  Servicing  is  required  when  the 
apparatus has been damaged in any way, such as power supply cord or plug 

is damaged, liquid has been spilled or objects have fallen into the apparatus, 

the  apparatus  has  been  exposed  to  rain  or  moisture,  does  not  operate 
normally, or has been dropped.

 

14.

 

Disconnecting from mains: Switching off the POWER switch all the functions 

and light indicators of the amplifier will be stopped, but fully disconnecting 

the  device  from  mains  is  done  unplugging  the  power  cord  from  the  mains 
input socket. For this reason, it always shall remain readily operable. 

15.

 

Equipment  is  connected  to  a  socket-outlet  with  earthing  connection  by 

means of a power cord. 

16.

 

The marking information is located at the bottom of apparatus. 

17.

 

The  apparatus  shall  not  be  exposed  to  dripping  or  splashing  and  that  no 

objects filled with liquids, such as vases, shall be placed on apparatus. 

 

NOTE:

 This equipment has been tested and found to comply with the limits for a Class 

A  digital  device,  pursuant  to  part  15  of  the  FCC  Rules.  These  limits  are  designed  to 
provide  reasonable  protection  against  harmful  interference  when  the  equipment  is 
operated  in  a  commercial  environment.  This  equipment  generates,  uses,  and  can 
radiate radio frequency energy and, if not installed and used in accordance with the 
instruction  manual,  may  cause  harmful  interference  to  radio  communications. 
Operation of this equipment in a residential area is likely to cause harmful interference 
in which case the user will be required to correct the interference at his own expense.  

 

WARNING

:

 

This product must not be discarded, under any circumstance, as 

unsorted  urban  waste.  Take  to  the  nearest  electrical  and  electronic  waste 
treatment centre. 

 

NEEC  AUDIO  BARCELONA,  S.L. 

accepts  no  liability  for  any  damage  that  may  be 

caused  to  people,  animal  or  objects  due  to  failure  to  comply  with  the  warnings 
above. 

Содержание eHSA2-250
















Отзывы: