Ecler essentials eMIMO1616, Руководство пользователя

Страница: 19 / 29

19
Note: the eMIMO1616 has an information screen which is activated by pushing and
holding simultaneously (>3 seconds) the CTRL key and the encoder on the front
panel:
The screen shows the following information:

Firmware version being used by the unit

NAME: name of the eMIMO1616 unit

Network connection parameters: IP address, subnet mask and network
gateway

Bank1: memory bank in use (1 or 2). Useful information for the detection of
and solution for various problems with the unit
 Admin: number of admin users connected to the unit (0 or 1)

Users: numbers of client users, via the eMIMO pilot application or web
browsers (0 to 20)
The main parameters, settings and functions which are accessible on the
eMIMO1616 from its web application are:

General configuration; unit name, network parameters, recording and
recovery of projects (overall equipment configuration), start mode,
firmware updates, default parameter reset, connection status, etc.

Management of user accounts, which will allow access to external clients
(end users) via the
eMIMO pilot application or web browsers: names,
passwords and enabled / disabled status

Front panel parameters:
o
adjustments to LCD screen: brightness, contrast, stand-by mode
o
overall access / blocking (for all front controls)
o
individual access / blocking for specific controls, and for specific
output zones. It is possible to allow access to the settings for some
zones and block them for others, or even decide which parameters
are accessible for each of them: volume adjustment and MUTE
and/or selection of sound source and/or equalisation via 3-band EQ
(BASS-MID-TREBLE)

Local and remote audio input parameters; names, polarity, volume, MUTE,
equalisation via 3-band EQ (BASS-MID-TREBLE), noise gate, high-pass filter,
etc.

Parameters for audio output (zones): names, mono / stereo mode, polarity,
selection of sound source, volume, accessible volume range for end users
(maximum and minimum levels), MUTE, equalisation via 3-band EQ (BASS-
MID-TREBLE), noise gate, high-pass filter, effect of MUTE port activation
(closing of external contact), etc.