Eckman EKECS21 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 23

Eckman EKECS21 Скачать руководство пользователя страница 9

- 8 -

VI

. ASSEMBLY

1) Unpacking

This product requires assembly.

Carefully remove the product from the box.

Inspect the product carefully to make sure no breakage or damage occurred during shipping.

Do not discard the packing material until you have carefully inspected and satisfactorily operated the product.

BEFORE ASSEMBLY

Firstly unpack and check all parts have been supplied. If you think any parts are

missing, first check the packaging again before calling the Eckman helpline on 0844 441 3011.

WARNING:

If any parts are damaged or missing, do not operate this product until the parts are replaced. Failure to heed this

warning could result in serious personal injury.

WARNING:

Do not attempt to modify this product or create accessories not recommended for use with this product. Any such

alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury

and will invalidate your warranty.

WARNING:

Do not connect to power supply until assembly is complete. Failure to comply could result in accidental starting and

possible serious personal injury.

2) Assembling the chain saw

- USE AS A CONVENTIONAL HAND-HELD CHAINSAW

Fit the rear handle to chain saw head machine motor and secure with the self-locking system.

-

Assembling the Oregon chain and Oregon bar onto the chain saw

«
...
7
8
9
10
11
...
»

Содержание EKECS21
























Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды