LAN Gateway Firmware V1.2
V1.8 25. April 2012
© 2012 – ECKELMANN AG | BERLINER STRASSE 161 | 65205 WIESBADEN | PHONE +49(0)611 7103-0 | FAX +49(0)611 7103-133 | eckelmann.de
12/34
5.
Restart the LAN Gateway by entering "
reboot
" and
ENTER
or by pressing the RESET key on the
enclosure. After the restart, enter “
?
” (hold keys) until the prompt symbol "
>
" appears.
6.
It is possible to enter monitor interface commands (e.g. "
ver
" and
ENTER
) (see also section 6)
7.
The monitor interface can be exited with
ENTER
.
The monitor interface has been left once the flashing cursor is not located on the same line as the ">
" prompt.
(The monitor interface ">" can be started at any time by enter "
?
" again)
8.
Following completion of the work, the program can be exited and the connection terminated.
The HyperTerminal session can be stored together with its connection parameters.
