B-FOCuS Router 312+
User Guide
ECI Telecom Ltd. Proprietary
12
DWG# 458006-0833-010 A00
•
Disable your network card and then enable it.
•
Delete your temporary Internet files, history files, and cookies.
•
Verify that your Windows LAN is configured for dynamic IP Addresses.
•
Verify that none of your applications are trying to create a dial-up
connection to the Internet.
•
If your router does not work after performing all the steps above, press
the reset button on the back panel for 10 seconds until the ADSL Sync
lamp turns off. The router will revert into its factory default settings.
Perform the above procedures again.
6.2
The ADSL Link LED Blinks but Does Not Go
Solid
The ADSL line is trying to train but for some reason it cannot establish a valid
connection. You are too far from the telco central office. Contact your DSL
service provider for further assistance.
6.3
The DSL Link LED is Always Off
Make sure you have ADSL service. You should get some kind of information
from your ISP that states that ADSL service is installed. You can usually tell if
the service is installed by listening to the phone line; you will hear some high-
pitched noise. If you cannot hear high-pitched noise, contact your ISP.
Verify that the phone line is connected directly to the wall socket and to the
ADSL input on your router. If you have installed a splitter on the phone line, and
accidentally connected the router to the phone side, the ADSL light will not
come on.
