Echowell Elite T101, Руководство пользователя

Страница: 13 / 16

<
Pulsports T-101/T-201
5. Newest Design: Change Display for BPM and %HR
1. When heart rate measure
function starts, you can
press T.MODE and
E.MODE simultaneous
to change display position
of “
BPM ” and
“ %HR ” Digital intensity to fit your need.
2. When the function is operating, the LCD will display: like above.
6. Target zone mode T-Z
Setup the target zone by entering the percentage of maximum
heart rate. Maximum heart rate based on the data you input.
1. Press ST/SP to change to next target zone set.
2. “ ” and “ ” will not display when the heart rate within the
target zone. (No Beep sound)
3. “ ” will display when the heart rate is below the lower limit of
the target zone. (Beep should sound).
4. “ ” will display while the heart rate is above the upper limit of
target zone. (Beep should sound).
5. Target zone setting:
a). Press E.MODE to change to “ T-Z ” mode.
b). Press SET 2 seconds to enter target zone setting mode.
c). Press T.MODE or ST/SP to select how many sets target
zone you want.
d). Refer the Data Setting Processes to adjust the Target zone
data (Refer Fig .D) .
Fig. D) Digital intensity target zone
program setting
E-12