Pulsports T-301
Pulsports T-301
E11
HEART RATE FUNCTION
DESCRIPTIONS
1.Start /Stop heart rate measure function
1. Press E.MODE 2 seconds to
start heart rate measurement
function.
2. When the function is operating,
the LCD will display the signal
as follow:
3. Press E.MODE 2 seconds to stop heart rate measurement function.
4. If a signal is not received for 5 minutes, the function will turn off
automatically.
2. Start/Stop heart rate data record function
1. Press E.MODE 2 seconds to start heart rate measurement function.
2. Press E.MODE to c
hange to “
STW
” function.
3. Press ST/SP, the signal shown as ”
” at the middle of the
display will change to “
“, it means the data record function is
started. Stop by pressing ST/SP, the signal will change to “
“.
4.
“
AVG
”, “
STW
”, “
CAL
”, “
EX.T
”, ”
C/H
”, “
WT.L
”, “
%FT
”, “
FT.L
” and
“
MAX
” functions will only work while the record function is on.
5.
“
C/H
” and “
%FT
” will be displayed automatically when heart rate is
measured. The value will become “--“ while no pulse is detected.
6.
“
CAL
”, “
C/H
”, “
WT.L
”, “
%FT
”, “
FT.L
” and “
T.FT
” mode will be
calculated when the heart rate is equal or over 90 bpm.
3. Reset heart rate record data
1. Press E.MODE to change
to “
STW
” mode.
2. Press T.MODE 2 seconds to clear the record data.
4. Heart rate display descriptions
1. Intensity = (Current heart rate/Maximum heart rate) × 100%.
2. Range of heart rate measurement is from 40 bpm to 240 bpm.
