36
•
Using the Web UI
H64159 Revision A
Ethernet MAC Address Filtering
: When this feature is
enabled, only the MAC addresses that you select can connect to
the terminal. A maximum of ten (10) addresses can be allowed.
Check the box to “Enable MAC Address Filtering”
If any TE is already connected to the terminal via Ethernet, the
MAC address of that TE will be detected and show up in the
“Add a Detected Device” field.
To add the detected MAC address, click on the address to
highlight it and then click Add. It will now show up in the
“Allowed MAC Address” field.
Port Forwarding Page
The Port Forwarding page is only available in NAPT mode and
includes:
•
DMZ – if enabled, all packets received from the space
link that are not routed to other addresses will be
forwarded to the DMZ host address.
•
Port Forwarding Rules. These fields allow you to
configure rules defining how packets of particular
protocols are routed, e.g. TCP port 80 for HTTP. Port
Forwarding rules are applied before the DMZ rule.
In the 6.7.x.y releases, the third octet of the IP address is
configurable to support the separate WLAN subnet.
