EchoStar Hughes 4510, Руководство пользователя

Страница: 15 / 47

Chapter 3 • Using the Web UI
H65874 Revision C
15
Chapter 3
Using the Web UI
3.1 Accessing the Web UI
The Hughes 4510 includes an internal Web User Interface (Web UI). To access the Web UI, open your
preferred web browser and enter the internal IP address of the terminal in the address bar.
 If you are using an Ethernet port, enter the following Ethernet IP address:
– http://192.168.128.100

If you are using a USB port, enter the following maintenance IP address:

http://169.254.1.1
The Web UI will then open the Terminal Status page. Along the top of all Web UI pages are icons
representing the categories of available subpages, such as Home, Connections, Settings, Usage , and
Support .
3.2 Home page
The Home page displays the current terminal status and allows the user to
set up the initial data connection.
On the left side of the page is the
Status bar. The fields in this section are
updated automatically when the status of any item changes.
1. Network: This field indicates the status of the cellular and satellite
connections. Once connected to the network, the Terminal Status
page will show that the UT is registered with the network. It also
shows the signal strength. See Table 2 for additional information.
2. Position: This field displays the current position status. If the
terminal acquired a GPS fix, it will display the latitude, longitude,
altitude, last time the GPS position was updated, and
geocoordinates in the Military Grid Reference System (MGRS). The
time is displayed in UTC format.
3. Terminal Properties: This field has been designed to indicate
miscellaneous status information.
Table 2: Status bar messages
Status Meaning Comment
Connecting... Connecting to cellular network. Cellular only
Connect Failed Attempt to connect to cellular network failed.
Connected Connected to cellular network (not yet ready).
Stopping… Stopping WAN connection/modem.
Stopped WAN connection/modem has been stopped.
Pending Cellular WAN is configured for ACA, and no devices
are present.
Attaching…
Connecting to satellite network. Satellite only