EchoStar DSB-890 2Ci, Руководство пользователя

Страница: 33 / 48

Troubleshooting
www.echostar-int.com Page 3 - 1
©
2004
E
c
h
o
S
tar In
tern
ati
o
nal
C
o
rpor
ati
o
n
A
ll ri
ght
s
r
e
s
e
rv
e
d
TROUBLESHOOTING 1. G
ENERAL
2. R
EMOTE
C
ONTROL
U
NIT
(RCU)
RELATED
Problem Possible cause What to do?
1. Nothing appears on
the receiver front
panel.
■
Main power cable is
damaged or not
connected.
■
Check the main
power cord and
insert it in the (wall
socket).
■
The On/Off switch on
the rear panel is set
to Off.
■
Set the On/Off switch
in the On position.
■
General domestic
power failure.
■
Check the domestic
power supply and
insert a new fuse.
2. You have forgotten
the PIN-code.
■
-
■
Contact your dealer.
Problem Possible cause What to do?
1. Receiver does not
respond to the
RCU.
■
Batteries are empty.
■
Insert new batteries.
2. Receiver does
sometimes not
respond to the
RCU.
■
Direct sun light from
behind the receiver.
■
Close the sun blinds
or get closer to the
receiver.
■
You do not aim
sufficiently at the
receiver.
■
Aim at the receiver
display.
■
Install a RCU
extender.
■
Batteries are almost
empty.
■
Insert new batteries.
3. L
IST RELATED
Problem Possible cause What to do?
1. The list is empty.
■
You have selected an
empty (favorite) list.
■
Press the White key,
select the Add option
to add the channels.
■
Press the Green key,
select the All
channels list.
■
The list is sorted.
■
Press the Blue key,
select the None
option.
■
No channels found
for the Satellite.
■
Press the MENU key
and select
Installation setup.
■
Select another
Search mode and
search again for
channels.
2. I cannot find the
channel while I
know it must be
there.
■
The list is sorted.
■
Press the Blue key,
select the None
option.
■
You are in the wrong
list.
■
Press the Green key,
select the All
channels list.
3. The list shows no
channel names.
■
The list is grouped.
■
If a selection has a +
in front, press the
i-key. Note that the
selection opens.
■
Press the Yellow key,
select the None
option.
4. There is only one
list available.
■
You have selected
the List access
option.
■
Press the MENU key,
select the List access
option - All.