Wireless Base User Guide
Echometer Company
5001 Ditto Lane
Wichita Falls, TX 76302
11 Sep 2012
•
WARNING:
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device
complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
•
NOTE: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at the user’s expense.
•
This equipment complies with the FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with a
minimum distance of 20 centimeters between the antenna and your body.
•
This
Class
A
digital
apparatus
complies
with
Canadian
ICES-003.
(Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada)
•
This device has been designed to operate with the antennas listed below. The specific
models listed or substitutes as specified below may be used.
o
Pulse W1030
o
Linx Tech ANT-2.4-CW-RAH-RPS: 2.4GHz
o
Substitutes may be used, as long as they meet the 2.4GHz, 50
Ω
, <2dBi gain,
RPSMA Male requirements.
