EchoMaster Pro PBS-MW01, Руководство по эксплуатации

Страница: 6 / 12

3 | BLIND SPOT DETECTION SYSTEM BLIND SPOT DETECTION SYSTEM | 4
3. INTRODUCTION
The Blind Spot Detection System is designed to aid in detecting vehicles that may have
entered the vehicle’s blind spot zone, which is represented by the vehicles in the diagram
below. The detection area is on both sides of your vehicle, extending rearward from the vehicle
to approximately 30 feet beyond the bumper. The system is designed to alert you of vehicles,
which will not allow for a safe lane change
.
30 ft
30 f
t
30 ft
30 f
t
4. LANE CHANGE ALERT
Lane Change Alert is activated when the turn signals are used to make a lane change and
when the vehicle speed exceeds 15 MPH. The warning zone of the system covers left and right
adjacent lanes with an estimated impact in less than 2 seconds. An audible tone will be heard
and the warning indicator lamp with the corresponding turn signal will flash when a vehicle is
within the warning zone or if there is a vehicle detected approaching at high speeds resulting
in an impact of less than 2 seconds during the lane change.