12
Installation Guide
12
tel - 1-800-477-2267
email - [email protected]
Illustrations are typical and may not match exact vehicle detail
EMUBCAMKIT
Universal Quad View Camera Kit
Follow these instructions if you are connecting to:
• Stand-alone monitor
• After-market radio with Rear camera input, No rear camera installed and On-screen option to turn-on
camera
• After-market Radio with two or more camera inputs (with one of them not being used) and On-screen
option to turn-on camera
Wiring Guide 1
1 2 3 4 5
ON
Step 1
Plug the Video Output Harness
into the video interface.
Step 2
Connect either the CVBS or AHD RCA to
the Video IN on the monitor. If the
monitor does not specifically say Analog
High Definition, use CVBS. Insulate the
red and blue wires.
OR
Connect either the CVBS or AHD RCA
to the Rear Camera IN on the After-market
radio. If the radio does not specifically
say Analog High Definition, use CVBS.
Insulate the red and blue wires.
Test
Set DIP switch 5 to the OFF (DOWN)
position. Turn the key on. Power up the
monitor or radio. Select the the correct
input on the monitor, or select correct
camera on the radio. See page 15 for
setting video output.
2
1
VIDEO IN
REAR CAMERA IN
Insulate these wires
when not using
