Echoflex Solutions Installation Guide
SmartSpace Controller–Gen 2
Update Firmware
If updated firmware is required, you can update the firmware on the
SmartSpace Controller–Gen 2 by using ETC UpdaterAtor software and a
microSD card. You can download UpdaterAtor from the ETC website at
.
Note:
Plan to update firmware when troubleshooting any issues with
the SmartSpace Controller–Gen 2.
1.
Get the firmware update file using UpdaterAtor.
2.
Save the firmware update file to the root directory of a microSD card.
3.
Ensure that power is supplied to the controller.
4.
Insert the microSD card in the SD slot on the side of the SmartSpace
Controller–Gen 2 enclosure.
•
The Dim Mode LED will illuminate amber in a triple-blink
pattern while the firmware is updating, and then will return to its
previous state when the update is complete.
•
If the LED illuminates red in a double-blink pattern, an error has
occurred. Ensure that the firmware file has not been renamed
and is located at the root directory on the microSD card, and then
attempt the firmware update again. If the LED continues the
double-blink pattern, contact Echoflex Solutions Technical
Services using the information at the bottom of page 1.
5.
When the LED returns to its previous state, remove the microSD card.
microSD
card slot
SmartSpace Controller–Gen 2
Page 12 of 12
Echoflex Solutions
