Echo TX-01, Инструкция по эксплуатации

Страница: 3 / 6

3RZHU2Q2ƈ
Power on: Press and hold the Power button for about 3 seconds until the
/('ƊDVKHVJUHHQ
3RZHURƈ Press and hold the Power button for about 3 seconds until the
JUHHQ/('WXUQVRƈ
Charging your Bluetooth Transmitter
Connect the USB charging cable to the USB charging socket
The LED indicator will stay red while charging and turn o
ƈ when fully
charged.
Noted: The LED indicator will stay red when the battery is low.
Pairing procedure
1.Ensure the transmitter "Echo-TX01" is turned on.
2.To enter pairing mode press and hold the pairing button for 3 seconds
XQWLOWKHJUHHQ/('ƊDVKHVTXLFNO\
3.Activate your mobile phones’ Bluetooth function
4.The Transmitter "Echo-TX01"will automatically search, pair and connect
with your Bluetooth device (this will take about 5 seconds).
5.After successful pairing, the LED will stay green.
Noted:
1-The pairing mode will last for 2 minutes.
7KHWUDQVPLWWHUZLOOWXUQRƈDXWRPDWLFDOO\LQRUGHUWRVDYHSRZHULISDLULQJ
is not achieved within 10 minutes.
3-Clear the pairing list:
Press and hold the power button for about 10 seconds until the green
DQGUHG/('ƊDVKWRJHWKHU
4-When "Echo-TX01" use as a BT transmitter
(1) If your BT receiver supports APTX Low Latency the transmission mode is:
APTX Low Latency
(2) If your BT receiver only supports APTX, the transmission mode is: APTX
(3) If your BT receiver does not support APTX, the transmission mode is: AAC
7
7
7
7
11