![background image](http://html1.mh-extra.com/html/echo/srm-400/srm-400_operators-manual_4018821011.webp)
11
SHOULDER HARNESS
•
Install the harness over the both shoulders and
adjust shoulder straps so that the quick release
latch rests low on the right hand side.
•
Attach the trimmer/brushcutter to the harness
by means of the quick release latch.
•
Make some practice sweeps as with a trimmer
and readjust the harness as necessary for
comfort and to maintain the cutter parallel to the
ground.
WARNING
DANGER
IN CASE OF EMERGENCY, PULL THE QUICK
RELEASE LATCH TO DISCONNECT THE
TRIMMER FROM THE HARNESS.
PULL
Quick
release
latch
TRIMMING
The nylon line will allow you to trim along walls and
fence lines. Always try to trim from right to left,
walking behind the unit and parallel to the wall or
fence, thus deflecting debris away from the
operator.
EDGING
1. The nylon line is intended only to cut grass and
should not be used to cut a normal edging
trench along stone or concrete driveway etc.
2. Tilt the unit vertically as illsutrated and use only
the line tip to remove unwanted growth.