Echo SRM-266 Скачать руководство пользователя | Manualshive

Страница: 12 / 52

background image

SAFETY

SRM-266

12

X7502028004

©

02/21

ECHO Incorporated

Do not operate this product indoors or in inadequately
ventilated areas. Engine exhaust contains poisonous emissions
and can cause serious injury or death.

Read Manuals

• Provide all users of this equipment with literature for instructions on safe

operation.

Clear The Work Area

• Always clear the work area of foreign objects such as rocks, broken glass,

nails, wire, or string,, and check for any hidden hazards. Spectators and
fellow workers must be warned, and children and animals prevented from
coming nearer than 50 ft. (15 m) while the unit is in use.

• Outside the 15 m (50 ft) zone, there is still a risk of injury from thrown

objects.

• Bystanders should be encouraged to wear eye protection.

• If you are approached, stop the engine and cutting attachment.

• When a bladed unit is used, there is the added risk of injury to bystanders

being struck with the moving blade in the event of a blade thrust or other
unexpected reaction of the blade.

Keep A Firm Grip

• Always hold throttle handle and support handle with thumbs and fingers

tightly encircling the handles.

Keep A Solid Stance

• Maintain footing and balance at all times. Do not stand on slippery,

uneven or unstable surfaces. Do not work in odd positions or on ladders.
Do not over reach.

• Keep cutting attachment below waist.

• Keep all body parts away from rotating cutting attachment

Avoid Hot Surfaces

• Keep exhaust area clear of flammable debris. Avoid

contact during and immediately after operation.

«
...
10
11
12
13
14
...
»

Содержание SRM-266





















































Отзывы:

Нет отзывов

Похожие инструкции для SRM-266

Бренд: GreenWorks Страницы: 25

Бренд: Vito Agro Страницы: 52

Бренд: benza Страницы: 100

Бренд: U-Line Страницы: 3

AMH-200-4S-ELITE

Бренд: Agrimate Страницы: 22

Бренд: SIZZIX Страницы: 32

Бренд: SIZZIX Страницы: 6

Бренд: Dolmar Страницы: 110

FoamWerks WA-8001

Бренд: Logan Graphic Products Страницы: 2

Бренд: Logan Graphic Products Страницы: 24

Бренд: Dahle Страницы: 1

Бренд: Hwayuan Electric Страницы: 49

Бренд: Stihl Страницы: 48

Orion 3015 Plus Series

Бренд: LVD Страницы: 72

Бренд: Paperfox Страницы: 5

Бренд: Partner Страницы: 18

Бренд: Cricut Expression Страницы: 41

Бренд: Bodor Страницы: 64

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды