manualshive.com logo in svg

Echo SRM-2320T, Руководство оператора

Поделиться
Скачать
Echo SRM-2320T Скачать руководство пользователя страница 24

OPERATION

SRM-2320T

24

X7732278300

© 08/2019 ECHO Inc.

Mixing Instructions

1.

Fill an approved fuel container 
with half of the required 
amount of gasoline.

2.

Add the proper amount of 
2-stroke oil to gasoline.

3.

Close container and shake to 
mix oil with gasoline.

4.

Add remaining gasoline, close 
fuel container, and remix.

Spilled fuel is a leading cause of hydrocarbon emissions. Some 
states may require the use of automatic fuel shut-off containers to 
reduce fuel spillage.

Storage

 - Fuel storage laws vary by locality. Contact your local government 

for the laws affecting your area. As a precaution, store fuel in an approved, 
airtight container. Store in a well-ventilated, unoccupied building, away from 
sparks and flames.

• Empty the fuel tank prior to storing the unit. Return unused fuel to an 

approved fuel storage container.

Stored fuel ages. Do not mix more fuel than you expect to use in 30 
days, 90 days when a fuel stabilizer is added.

Stored two-stroke fuel may separate. ALWAYS shake fuel container 
thoroughly before each use.

Used oil and gasoline, and soiled towels are hazardous waste 
materials. Disposal laws vary by locality.

Fuel to Oil Mix – 50:1 Ratio

US

Metric

Gas

Oil

Gas

Oil

gal.

fl.oz.

L

cc

1

2.6

5

100

2

5.2

10

200

5

13

25

500

Содержание SRM-2320T





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды