![background image](http://html.mh-extra.com/html/echo/srm-22gel/srm-22gel_operators-manual_531725042.webp)
14
1.
Angle transmission
- Having two gears to change the
angle of rotating axis.
2.
Shaft tube
- Part of the unit that provides a casing for
power transmission shaft.
3.
Safety decal
- Part number X505000-140
4.
Front (loop) handle
- Light weight, suitable for Nylon
line trimmer only.
5.
Ignition switch
- "Slide switch" mounted on top of the
throttle trigger housing, move switch forward to RUN,
backward to STOP position.
6.
Throttle trigger
- Activated by the operator's finger for
controlling the engine speed.
7.
Throttle trigger lockout
- Locks throttle trigger in the
idling position until you have a proper grip with your right
hand around the handle.
8.
Air cleaner cover
- Covers air filter.
9.
Fuel tank
- Contains fuel and fuel filter.
10.
Fuel tank cap
- For closing the fuel tank.
11.
Starter handle
- Pull handle to start the engine.
(
"
" START
)
12.
Silencer cover
- Cover the silencer not to make operator
touch to hot surface of silencer.
13.
Spark plug
14.
Operator's Manual
- Included with unit.
Read before operation and keep for future reference to
learn proper, safe operating techniques.
15.
Tools
- 17 x 19 mm T-wrench (combination screwdriver
/ spark plug socket), 4 mm hexagonal wrench, bar tool.
16.
Goggles
17.
Plastic shield
- For nylon line head only.
Device to protect the operator from accidental contact
with the cutting head and thrown objects.
Cut off knife; Cut nylon line to adjust line length to proper
swath.
Shield plate and three screws (M5 x 16).
18.
Cutting attachment
- Nylon line head for cutting grass
and weed. (
and washer)