![background image](http://html1.mh-extra.com/html/echo/srm-225-01-09/srm-225-01-09_operators-manual_4164551006.webp)
6
equIpment
WARNING
Use only ECHO approved attachments. Serious injury may result from the use of a non-approved attachment com-
bination. ECHO, INC. will not be responsible for the failure of cutting devices, attachments or accessories which
have not been tested and approved by ECHO. Read and comply with all safety instructions listed in this manual and
safety manual.
• Check unit for loose/missing nuts, bolts, and screws. Tighten and/or replace as needed.
• Inspect shield for damage and ensure that the cut-off knife is securely in place. Replace if either is damaged or miss
-
ing.
• Check that the cutting attachment is firmly attached and in safe operating condition.
• Check that front loop handle and shoulder strap/ or shoulder/waist harness are adjusted for safe, comfortable opera
-
tion. See Assembly Section for proper adjustment.
An Emission Control Label
is located on the engine. (This is an EXAMPLE ONLY, information on label varies by
engine FAMILY).
PRODUCT EMISSION DURABILITY (EMISSION COMPLIANCE PERIOD)
The 300 hour emission durability compliance period is the time span selected by the manufacturer certifying the
engine emissions output meets applicable emissions regulations, provided that approved maintenance procedures are
followed as listed in the Maintenance Section of this manual.
e
mIssIon
c
ontrol
(
eXhaust
&
evaporatIve
)
EPA Phase 2 / C.A.R.B. TIER III
WARNING
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all
openings.
•
ALWAyS
stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop
before removing obstructions, clearing debris, or servicing unit.
•
DO NOT
start or operate unit unless all guards and protective covers are properly assembled to unit.
•
NEVER
reach into any opening while the engine is running. Moving parts may not be visible through openings.
Important enGIne InformatIon
enGIne famIly: 9ehXs.0214Kl dIsplacement: 21.2
cc
emIssIon complIance perIod : 300 hrs.
thIs enGIne meets u.s. epa ph2 eXh and 2007 and
later calIfornIa eXh and evap emIssIon reGula-
tIons for s.o.r.e. refer to oWner's manual for
maIntenance specIfIcatIons and adJustments.
WARNING
Check fuel system for leaks due to fuel tank damage, especially if the unit is dropped. If damage or leaks are found,
do not use unit, otherwise serious personal injury or property damage may occur. Have unit repaired by an autho-
rized servicing dealer before using.
The emission control system for the engine is EM/TWC (Engine
Modification and 3-way Catalyst) and for the fuel tank the Control
System is EVAP (Evaporative Emissions) or N (for nylon tank).
Evaporative emission may be applicable to California models only.