3
•
Keep hands and body away from hot surfaces
such as silencer and cylinder area when
handling the unit to prevent from heat injury.
•
Never attempt to use incomplete machine or
one fitted with unauthorized modification.
•
A fully loaded unit will change your
equilibrium. Extra precautions should be
taken to maintain your footing and balance.
•
Check the shoulder harnesses are not
tangled with any control levers when you put
the unit on your back.
•
This unit is designed for upright use only, do
not lay down or lean excessively to avoid
leakage of chemicals when operating and
transporting.
REDUCE NOISE
NOTE
Before operating the unit, check and follow
local regulations concerning sound level and
hours of operation.
•
Avoid using units when people are likely to be
disturbed, such as late at night or early in the
morning.
•
Operate the unit at the lowest possible throttle
setting that gets the job done.
•
Make sure the silencer works well. Also check
the air intakes and the air filter to make sure
the unit is working properly.
•
Use only one piece of equipment at a time.
•
Wear hearing protection when operating the
unit.
REDUCE CHANCES OF DAMAGE
•
Do not use the unit in a windy day or rainy
day to avoid chemical drift.
•
Before starting the job, check wind direction.
Avoid blowing in the direction of open doors
and windows, cars, pets, children or anything
that could be harmed by chemical.
•
Dust and mist blowing must be done
leewardly. Choose morning or eving when it is
not so windy, and the ground temperature
reserves, so as to minimize dispersion losses
and enhance chemical adhesion effect and
for less hazardous operation.
