12
Liquid valve
FILLING CHEMICAL TANK
•
Close liquid valve.
•
Fill liquid chemical through filter into tank. Stir
up after filling to avoid chemical deposits at
bottom of tank.
NOTE
Be sure that valve is closed before starting
engine.
OPERATING MIST BLOWER
FOR SAFE OPERATION
1. Secure the chemical tank cap.
2. Check all connections to avoid chemical leak.
(Nozzle, Nozzle pipe, hose etc.)
3. Avoid wearing loose clothing and always wear
safety glasses and gloves.
4. Use a face filter mask to avoid breathing
chemical.
5. Check wind direction before spraying.
6. Do not point nozzle in the direction of people.
7. Stop the engine when refueling and/or
repacing parts.
8. Close fuel chemical liquid valve when not in
use.
9. Avoid using at engine speeds where the
clutch slips.
Spray
Mist
TURN NOZZLE
Clockwise
: Mist
Anticlockwise : Spray
NOZZLE
•
Adjustable nozzle (Standard type) is provided
with this power sprayer.
•
Standard nozzle discharge volume and
pressure are as follows.
Chemical liquid Discharge :
Mist : 0.8 L/min
Spray: 1.5 L/min (1.0MPa :10 kgf/cm
2
)
NOTE
- You can use a nozzle other than standard
nozzle other standard nozzle which
discharges liquid under 7.0 L at nozzle
pressure :
1.0 MPa (10 kgf/cm
2
) as required.
- Long hose (approx. 100 m) is available as
required.
- In this case, use standard nozzles indicated
above or less discharge volume nozzle.
•
As for variety of optional nozzles, please refer
to reverse side of front cover.
SPRAYING
•
Ensure that chemical liquid valve is closed
before starting engine.
•
After engine is warmed up, turn throttle lever
to the high speed position (Upper position)
and open liquid valve.
NOTE
Since this unit is equipped with a centrifugal
clutch, sprinkling not possible when the engine
is running at low speeds (idling).
Chemical liquid tank
Chemical liquid
tank cap
