background image

SHINDAIWA LIMITED WARRANTY STATEMENT FOR

SPRAYERS SOLD IN USA AND CANADA BEGINNING 01/01/2010

ECHO, INC’S RESPONSIBILITY

ECHO Incorporated’s (ECHO, INC.) Limited Warranty provides to the original end user purchaser that this Shindaiwa 

product is free from defects in material and workmanship. Under normal use and maintenance from date of purchase, 

ECHO, INC. agrees to repair or replace at it’s discretion, any defective product free of charge at any authorized Shindaiwa 

servicing dealer within listed below application time  periods

LIMITATIONS AND EXCLUSIONS

THIS LIMITED WARRANTY IS ONLY APPLICABLE TO SHINDAIWA PRODUCTS SOLD BY AUTHORIZED

SHINDAIWA DEALERS. IT IS EXTENDED TO THE ORIGINAL END USER PURCHASER ONLY, AND IS NOT 

TRANSFERABLE TO SUBSEQUENT OWNERS.

 Repair parts and accessories replaced under this warranty are 

warranted only for the balance of the original unit or accessory warranty period. Any damage caused by improper use, 

modifications, installation or  maintenance is not covered by this warranty. All parts or products replaced under warranty 

become the property of ECHO, INC.  For a list of Authorized Shindaiwa Dealers refer to WWW.SHINDAIWA.COM or call 

1-877-986-7783.

OWNER’S RESPONSIBILITY

To ensure trouble free warranty coverage it is important that you register your Shindaiwa equipment on-line at WWW.

SHINDAIWA.COM or by filling out the warranty registration card supplied with your unit. Registering your product confirms 

your warranty coverage and provides a direct link if we find it necessary to contact you.  The owner shall demonstrate 

reasonable care and use, and follow preventative maintenance, storage instructions, and as prescribed in the Use & Care 

Manual. Should a product difficulty occur, you must, at your expense, deliver or ship your Shindaiwa unit to an authorized 

Shindaiwa servicing dealer for warranty repairs (within the applicable warranty period), and arrange for pick-up or return 

of your unit after the repairs have been made. For your nearest authorized Shindaiwa servicing dealer, call Shindaiwa’s 

Dealer Referral Center, at 1-877-986-7783 or you can locate a Shindaiwa servicing dealer at WWW.SHINDAIWA.COM. 

Should you require assistance or have questions concerning Shindaiwa’s Warranty Statement, you can contact our 

Consumer Product Support Department at 1-800-673-1558 or contact us through the web at WWW.SHINDAIWA.COM.

PRODUCT WARRANTY PERIOD

RESIDENTIAL APPLICATION

• 5 YEAR WARRANTY - 

Units for residential, or non-income producing use will be covered by this limited warranty for five 

(5) years from date of purchase.

EXCEPTIONS:

• Failure to read and follow Use & Care Manual

• Failure to follow all chemical manufacturers’ instructions included on their label or elsewhere

• Damage caused by:

Failure to follow Storing/Maintaining Your Sprayer section in Use & Care Manual

Use of powder based chemicals with or in a piston pump sprayer

Wear items including but not limited to: seals, gaskets, pistons, hoses, diaphragms, straps or any wear item.  These items 

are covered for 90 days from date of purchase.

Any mis-use of product is not covered including but not limited to:  using un-approved chemicals or parts, un-approved 

uses, using damaged or missing units/parts during operation, or modifying your sprayer in any manner

COMMERCIAL APPLICATION

•  2 YEAR WARRANTY -

 Units for commercial, institutional, agricultural, industrial, or income producing use will be 

covered by this limited warranty for two (2) years from the date of purchase.

EXCEPTIONS:

Damage caused by:

• Failure to read and follow Use & Care Manual

• Failure to follow all chemical manufacturers’ instructions included on their label or elsewhere

• Failure to follow Storing/Maintaining Your Sprayer section in Use & Care Manual

Use of powder based chemicals with or in a piston pump sprayer

Wear items including but not limited to: seals, gaskets, pistons, hoses, diaphragms, straps or any wear item.  These items 

are covered for 90 days.

Any mis-use of product in not covered including but not limited to:  using un-approved chemicals or parts, un-approved 

uses, using damaged or missing units/parts during operation, or modifying your sprayer in any manner

RENTAL APPLICATION - 90 DAYS WARRANTY

• Units for rental use will be covered against defects in material and workmanship for a period of 90 days from the date of

purchase except for any one of the above listed EXCEPTIONS

PURCHASED REPAIR PARTS AND ACCESSORIES  •

  90-day all applications except for any one of the above listed 

EXCEPTIONS.  Your receipt of purchase including date, model and serial number must be maintained and presented to an 

authorized Shindaiwa servicing dealer for warranty service. Proof of purchase rests solely with the customer. Some states 

do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. Some states 

do not allow the exclusion or limitation of incidental or consequential damages, so you may also have other specific legal 

rights which vary from state to state. This limited warranty is given by ECHO Incorporated, 400 Oakwood Rd., Lake Zurich, 

IL 60047.

DISCLAIMER OF IMPLIED WARRANTIES

THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER EXPRESSED OR IMPLIED WARRANTIES, INCLUDING 

ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR USE AND ANY IMPLIED WARRANTY OF 

MERCHANTABILITY OTHERWISE APPLICABLE TO THIS PRODUCT. ECHO, INC. AND ITS AFFILIATED COMPANIES 

SHALL NOT BE LIABLE FOR ANY SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGE, INCLUDING LOST 

PROFITS. THERE ARE NO WARRANTIES EXTENDED OTHER THAN AS PROVIDED HEREIN. THIS LIMITED 

WARRANTY MAY BE MODIFIED ONLY BY ECHO, INC.                                                 

Содержание shindaiwa SP41BPS

















































Отзывы: