Echo SHC-266 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 36

background image

SHC-266

DESCRIPTION

X7502026702

11

© 4/2013 ECHO Inc.

1.

POWER HEAD

- Includes the Engine, Clutch, Fuel System, Ignition System and Recoil Starter.

2.

THROTTLE HANDLE - FOR RIGHT HAND

- Contains Stop Switch, Throttle Lockout, and Throttle

Trigger.

3.

THROTTLE TRIGGER LOCKOUT

- This lever must be held during starting. Operation of the throttle

trigger is prevented unless throttle trigger lockout lever is engaged.

4.

STOP SWITCH

- “SLIDE SWITCH” mounted on top of the Throttle Trigger Housing. Move switch

FORWARD to RUN, BACK to STOP.

5.

SUPPORT HANDLE - FOR LEFT HAND

- Cushioned grip for Left Hand.

6.

DRIVE SHAFT ASSEMBLY

- Includes the flex drive shaft, rear handle assembly, harness ring,

cushioned front shaft grip, and safety decals.

7.

BLADES

- Double reciprocating blades mounted to a blade support bar. Double sided blades, are

capable of cutting on either side.

8.

GEAR HOUSING ASSEMBLY

- Gear housing assembly fixed straight extension.

9.

THROTTLE TRIGGER

- Spring loaded to return to idle when released. During acceleration, depress

gradually for best operating technique.

10.

BLADE COVER

- Used to cover blade during transport and storage. Remove blade cover before using

unit.

11.

SPARK PLUG

- Provides spark to ignite fuel mixture.

12.

TOP GUARD

- Protects arm from the hot engine.

13.

SPARK ARRESTOR MUFFLER OR SPARK ARRESTOR MUFFLER WITH CATALYST

- The muffler or

catalytic muffler controls exhaust noise and emission. The spark arrestor screen prevents hot, glowing
particles of carbon from leaving the muffler. Keep exhaust area clear of flammable debris.

14.

FUEL TANK

- Contains fuel and fuel filter.

15.

RECOIL STARTER HANDLE

- Pull handle slowly until starter engages, then quickly and firmly. When

engine starts, return handle slowly. DO NOT let handle snap back or damage to unit will occur.

16.

FUEL TANK CAP

- Covers and seals fuel tank opening.

17.

PURGE BULB

- Pumping purge bulb before starting engine draws fresh fuel from the fuel tank, purging

air from the carburetor. Pump purge bulb until fuel is visible and flows freely in the clear fuel tank return
line. Pump purge bulb an additional 4 or 5 times.

18.

AIR CLEANER

- Contains replaceable filter element.

19.

CHOKE CONTROL

- Located on the air cleaner housing. Move choke lever to Cold Start (

) to close

choke for cold start. Move choke lever to “Run” (

) position to open choke.

«
...
9
10
11
12
13
...
»

Содержание SHC-266





































Отзывы:

Нет отзывов

Похожие инструкции для SHC-266

Бренд: Jasco Страницы: 11

Бренд: MacDon Страницы: 272

Бренд: MacDon Страницы: 70

Бренд: Raytech Страницы: 21

Бренд: Rapid Technic Страницы: 152

Бренд: Garelick Страницы: 2

Бренд: Gardico Страницы: 2

Бренд: OceanSat Страницы: 85

Бренд: Xiitech Страницы: 6

Бренд: Magicfx Страницы: 25

Бренд: Gilson Страницы: 8

ABS-Lock III-BE

Бренд: ABS Страницы: 8

Бренд: Kelvin Страницы: 30

Бренд: BCP Страницы: 8

Бренд: Heiniger Страницы: 164

Бренд: impact Страницы: 8

Бренд: Audio Precision Страницы: 76

Бренд: ProFurl Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды