background image

10

For safe use of your product

 WARNING

Users of the product

The product should not be used by:



people who are tired



people who have taken alcohol



people who are on medication



people who are pregnant



people who are in poor physical 
condition



people who have not read the op-
erator's manual



children

‹

Failure to observe these instruc-
tions could lead to an accident.

Environment of use and operation



Do not use the product in places where there is no sure 
foothold, such as on steep slopes or after rainfall, as 
such places are slippery and dangerous.



Do not operate the product at night or in dark places 
with poor visibility.



When using the product on a gentle slope, work in a lev-
el, contour-like motion.

‹

A serious injury could result if you fall or slip, or fail to oper-
ate the product correctly. 



For your own health and your safe and comfortable 
work, operate the machine within the air temperature 
range of -5 

o

C to 40 

o

C.

‹

Failure to observe these instructions could result in damage 
to your health.

Turn off the engine when moving around

When moving around in the situations described below, 
turn off the engine and ensure that the trimmer blade has 
stopped rotating, then fit the trimmer blade cover and po-
sition the silencer away from yourself.



Moving to the place where you are working



Moving to another area while you are working



Leaving the place where you have been working

‹

Failure to observe these precautions could cause burns or 
serious injury.



When transporting the product by car, empty the fuel 
tank, fit the trimmer blade cover, and secure the product 
firmly in place to prevent it from moving around.

‹

Travelling by car with fuel in the trimmer tank could lead to a 
fire.

Vibration and cold

It is believed that a condition called Raynaud's Phenome-
non which affects the fingers of certain individuals may be
brought about by exposure to vibration and cold. Expo-
sure to vibration and cold may cause tingling and burning,
followed by loss of  colour and numbness in the fingers.
The following precautions are strongly recommended be-
cause the minimum exposure which might trigger the ail-
ment is unknown.



Keep your body warm, especially the head and neck, 
feet and ankles, and hands and wrists.



Maintain good blood circulation by performing vigorous 
arm exercises during frequent work breaks, and also by 
not smoking.



Limit the number of hours of operation.
Try to fill each day with jobs where operating the trim-
mer or other hand-held power equipment is not re-
quired.



If you experience discomfort redness and swelling of 
the fingers, followed by whitening and loss of feeling, 
consult your physician before exposing yourself further 
to cold and vibration.

‹

Failure to observe these instructions could result in damage 
to your health.

Repetitive stress injuries

It is believed that over-using the muscles and tendons of
the fingers, hands, arms and shoulders may cause sore-
ness, swelling, numbness, weakness and extreme pain to
the areas just mentioned. Certain repetitive hand activities
may put you at a high risk for developing a repetitive
stress injury (RSI).
To reduce the risk of RSI, do the following:



Avoid using your wrist in a bent, extended or twisted 
position.



Take periodic breaks to minimize repetition and rest 
your hands. Reduce the speed and force in which you 
do the repetitive movement.



Do exercises to strengthen hand and arm muscles.



See a doctor if you feel tingling, numbness or pain in 
your fingers, hands, wrists or arms. The sooner RSI is 
diagnosed, the more likely permanent nerve and muscle 
damage can be prevented.

‹

Failure to observe these instructions could result in damage 
to your health.

Proper training

Do not permit operation without proper training and protective equipment.

Be thoroughly familiar with the controls and proper use of unit. 
Know how to stop the unit and shut off the engine. 
Know how to unhook a harnessed unit quickly. 
Never allow anyone to use the unit without proper instruction. 

Содержание RM-410ES





















Отзывы: