Echo Pro Attachment PAS-225VP Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 64

background image

SAFETY

PAS-225/SB/VP/VPB

12

X7732274006

© 09/21 ECHO Incorporated

Read the Manuals

• Provide all users of this equipment with the Operator’s Manual for

instructions on Safe Operation.

Clear the Work Area

• Spectators and fellow workers must be warned, and children and animals

prevented from coming nearer than 15 m (50 ft.) while the unit is in use.

• Take wind conditions into account: avoid open doors and windows.

• Do not point blower at people or animals.

• Review area to be cleared. Look for potential hazards such as stones or

metal objects.

Keep a Firm Grip

• Always hold throttle handle and support handle with thumbs and fingers

tightly encircling the handles.

Keep a Solid Stance

• Maintain footing and balance at all times. Do not stand on slippery,

uneven or unstable surfaces. Do not work in odd positions or on ladders.

Do not overreach.

Avoid Hot Surfaces

• During operation, the drive shaft housing and

attachment bearing housing may become very hot,

too hot to touch. Avoid contact during and

immediately after operation.

Equipment

Use only ECHO attachments. Serious injury may result from the
use of a non-approved attachment combination. ECHO
Incorporated will not be responsible for the failure of cutting
devices, attachments or accessories which have not been
tested and approved by ECHO. Read and comply with all safety
instructions.

◆

Do not attempt to modify this product. Serious injury can
result from the use of any modified product.

◆

Check unit for loose or missing nuts, bolts, and screws.
Tighten or replace as needed.

«
...
10
11
12
13
14
...
»

Содержание Pro Attachment PAS-225VP

































































Отзывы:

Нет отзывов

Похожие инструкции для Pro Attachment PAS-225VP

Бренд: K&M Страницы: 9

Бренд: babymoov Страницы: 12

Бренд: BabyOno Страницы: 24

Бренд: babymoov Страницы: 4

Бренд: Yealink Страницы: 6

Бренд: Trace2O Страницы: 9

KTS-WB61141142 Series

Бренд: SICK Страницы: 8

LCD Touch BacPac

Бренд: GoPro Страницы: 25

Бренд: Quantum Страницы: 3

PACMAN AIR HOCKEY 4P

Бренд: NAMCO Страницы: 18

Бренд: Naterial Страницы: 135

Бренд: ICP DAS USA Страницы: 4

PACCAR PACMOBILE 20

Бренд: DAF Страницы: 18

Бренд: PCB Piezotronics Страницы: 9

Бренд: F&F Страницы: 8

Бренд: Freefly Страницы: 8

Prime Chime Plus

Бренд: NICOR Страницы: 4

Бренд: GARDEN friend Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды