Echo POWER PRUNER DPPT-2600H Скачать руководство пользователя страница 8

Страница: 8 / 52

SAFETY

DPPT-2600H

X7508310101

Avoid contact of the guide bar tip with any object while the saw chain is

moving.

Cut only wood. Avoid striking concrete, metal, wire, or other obstructions

which could cause kickback or damage to the saw chain.

If the saw chain does strike a foreign object, immediately stop the engine,

inspect and repair the Power Pruner if necessary.

Handling the Product

General Safety Warnings and Instructions

This section contains the prescribed general safety warnings and

instructions for battery-powered products contained in UL 2595 and for

handheld tools, transportable tools and lawn and garden machinery

contained in UL 62841-1. Additional important warnings and instructions are

provided in subsequent sections of this manual.

Important Safety Instructions

Read all safety warnings, instructions, illustrations, and
specifications provided with this power tool. Failure to follow all
instructions listed below may result in electric shock, fire,
serious injury and/or property damage.

Save all warnings and instructions for future reference

The term "power tool" in the warnings refers to your mains-operated

(corded) power tool or battery-operated (cordless) power tool.

Work Area Safety

• Keep work area clean and well lit.

Cluttered or dark areas invite

accidents.

• Do not operate power tools in explosive atmospheres, such as in the

presence of flammable liquids, gases or dust.

Power tools create sparks

which may ignite the dust or fumes.

• Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

Содержание POWER PRUNER DPPT-2600H





















































Результаты поиска

Содержание POWER PRUNER DPPT-2600H

Отзывы:

Похожие инструкции для POWER PRUNER DPPT-2600H

Бренды по названию

Популярные бренды

Echo POWER PRUNER DPPT-2600H, Руководство оператора

Результаты поиска

Содержание POWER PRUNER DPPT-2600H

Отзывы:

Похожие инструкции для POWER PRUNER DPPT-2600H

Бренды по названию

Популярные бренды