background image

DPPT-2600H

SAFETY

X7508310101

11

© 01/24 ECHO Incorporated

• Disconnect the plug from the power source and/or the battery from the 

power tool before making any adjustments, changing accessories, or 

storing power tools. 

Such preventive safety measures reduce the risk of 

starting the power tool accidentally

.

• Store idle power tools out of the reach of children and do not allow 

persons unfamiliar with the power tool or these instructions to operate the 

power tool. 

Power tools are dangerous in the hands of untrained users

.

• Maintain power tools and accessories. Check for misalignment or binding 

of moving parts, breakage of parts and any other condition that may affect 

the power tool’s operation. If damaged, have the power tool repaired 

before use. 

Many accidents are caused by poorly maintained power tools

.

• Keep cutting tools sharp and clean. 

Properly maintained cutting tools with 

sharp cutting edges are less likely to bind and are easier to control

.

• Use the power tool, accessories and tool bits etc. in accordance with 

these instructions, taking into account the working conditions and the 

work to be performed. 

Use of the power tool for operations different from 

those intended could result in a hazardous situation.

• Keep handles and grasping surfaces dry, clean, and free from oil and 

grease. 

Slippery handles and grasping surfaces do not allow for safe 

handling and control of the tool in unexpected situations.

 

Battery Tool Use and Care

• Recharge batteries only with ECHO eFORCE

®

 56V battery series 

chargers. 

A charger that is suitable for one type of battery may create a 

risk of fire when used with another battery

.

• Use only with ECHO eFORCE

®

 56V battery series. 

Use of any other 

battery may create a risk of injury and fire

.

• When battery is not in use, keep it away from other metal objects, like 

paper clips, coins, keys, nails, screws or other small metal objects, that 

can make a connection from one terminal to another. 

Shorting the battery 

terminals together may cause burns or a fire

.

• Under abusive conditions, liquid may be ejected from the battery; avoid 

contact. If contact accidentally occurs, flush with water. If liquid contacts 

eyes, additionally seek medical help. 

Liquid ejected from the battery may 

cause irritation or burns

.

• Do not open or destroy the battery. 

Electrolytes contained within the 

battery are corrosive and may cause damage to eyes or skin if released. 

It may be toxic if swallowed.

Содержание POWER PRUNER DPPT-2600H





















































Отзывы: