4
Symbol
description/
application
Symbol form/
shape
Symbol
description/
application
Symbol form/
shape
HOT
SURFACE
Carburetor
adjustment
- Idle speed
Carburetor
adjustment
- High speed
mixture
Symbol
description/
application
Symbol form/
shape
Symbol
description/
application
Symbol form/
shape
Read and understand
Operator's Manual.
Wear eyes, ears and
head protection
Emergency stop
Fuel and oil mixture
Finger Severing
Carburetor
adjustment
- Low speed
mixture
Safety/Alert
Avoid all power
lines. This unit is
not insulated
against electrical
current.
Wear hand
protection. Use
two handed.
DO NOT smoke
near fuel.
DO NOT allow
flames or sparks
near fuel.
Wear slip
resistant foot
wear.
Engine choke
control.
Ignition
ON/OFF
Primer
bulb
DECALS
Locate these safety decals on your unit. The complete unit illustration found in the "DESCRIPTION" section, will help
you locate them. Make sure the decals are legible and that you understand and follow the instructions on them. If a decal
cannot be read, a new one can be ordered from your ECHO Dealer. See PARTS ORDERING instructions for specific
information.
These decals are in English only:
Shaft Decal
INTERNATIONAL
SYMBOLS
Keep bystanders away
15 m (50 ft.)
Keep feet away
from blade
Thrown
objects
Direction of
blade rotation
- WARNING - DANGER -
• When used improperly this edger could cause serious personal injury. Read and follow all safety precautions
in the owner's manual. • Never operate without eye protection. • Always inspect area for hidden or throwable
objects. Never use in gravel. • Stay clear of rotating blade at all times. Keep bystanders at least 50' away. • Stop
engine before adjusting cutting height or performing ay service. • Never operate with unit positioned on left
side of body. • Use only ECHO approved replacement blades on this unit. • Do not use edger blade on any brush
cutter. • Edger attachment and blade are intended for edging only. • After replacing or servicing blade, arbors,
nut and cotter pins must be assembled properly.
