ASSEMBLY
PB-580 H/T
22
X7505200708
© 01/20 ECHO Incorporated
5.
Position throttle cable
along the outside of
elbow. Loosen knob
(H) on handle (E).
Align notches in
handle with tabs (F)
and install onto swivel
pipe (C) past long
ridges in pipe.
6.
Insert anti-static wire
through swivel pipe
(wire will hang freely
in pipe).
7.
Assemble swivel pipe into flexible pipe and tighten clamp (A).
8.
Clip throttle cable into throttle cable guide loop.
9.
Move handle (E) to desired position. Tighten knob (H) hand tight.
10. Assemble straight pipe (K) onto
swivel pipe, until you feel light
resistance. Hold swivel pipe
and turn straight pipe
clockwise, engaging positive
locking channels, until
connection is firm. Do not force
connection.
11. Assemble straight pipe with
decal (J) to straight pipe as in step 10.
Note: Blower use will eventually loosen pipe connections. Exclusive
positive locking system allows pipes to be tightened. If
loosening occurs, remove two straight pipes and install
according to instructions 10 & 11.
D
G
B
H
A
C
F
E
K
J
C
