Echo PB-250LN, Руководство оператора

Страница: 24 / 44

OPERATION PB-250LN
24 X7501186001
© 2/2016 ECHO Inc.
Always wear safety glasses,
hearing protection and a face
filter mask or serious personal
injury may result. Do not point
the blower pipe in the direction
of people or pets.
Use reduced speed only when
performing light-duty tasks or to
comply with local noise
regulations. Continuous low speed
operation may allow fuel/oil
residue to build-up on the piston
and cause rapid build-up of carbon
on the spark arrestor screen,
resulting in overheating and
engine damage. To reduce harmful
build-up, run engine at wide open
throttle for at least 5 minutes every hour, and inspect/clean the spark
arrestor screen after approximately 40 hours of operation.
Read the Safety Section carefully.
To avoid engine damage due to over-revving, do not
block blower pipe.
For more information scan this QR
code.
1. Use only during appropriate hours.
2. Allow the engine to warm up at a fast idle for a few
minutes.
3. Control engine speed with throttle trigger (F), or for
continuous use, set engine speed with throttle position lever (B). Rotate
throttle position lever forward for lower speed, back for higher speed.
4. Use lower speed to blow debris from hard surfaces.
5. Additional speed may be necessary to clean debris, snow, etc. from lawns
and flowerbeds.