9
P
OWER
B
LOWER
O
PERATOR
'
S
M
ANUAL
1. SPARK PLUG -
Provides spark to ignite fuel mixture.
2. THROTTLE POSITION LEVER -
Pull back to increase engine speed. Friction washers maintain throttle trig-
ger setting.
3. MUFFLER/SPARK ARRESTER -
7KHVSDUNDUUHVWHUPXIÀHUFRQWUROVWKHH[KDXVWQRLVHZKLOHWKHVSDUNDUUHVWHU
SUHYHQWVKRWJORZLQJSDUWLFOHVRIFDUERQIURPOHDYLQJWKHPXIÀHU
4. FUEL TANK CAP -
For closing the fuel tank.
5. CHOKE LEVER -
Lever is located on right side of the air cleaner. Move lever DOWN to close choke (starting
position) and for emergency stopping. Lift up to open choke (run position).
6. AIR CLEANER -
Contains replaceable felt element.
7. IGNITION SWITCH -
"SLIDE SWITCH" mounted on top of handle. Slide
forward
to
start
and
run
. Slide
back
to stop.
8. THROTTLE TRIGGER -
Spring loaded to return to idle when released if throttle position lever is not engaged.
9. BLOWER PIPES -
Twist lock design.
10. STARTER HANDLE -
Pull handle to start the engine. DO NOT let handle snap back or damage to unit will oc-
cur.
11. PURGE BULB -
Pumping purge bulb before starting draws fresh fuel from fuel tank to carburettor replacing air
DQGROGIXHO%HIRUHVWDUWLQJSXPSUHSHDWHGO\QRUPDOO\WLPHVXQWLOIXHOLVYLVLEOHLQ&OHDUIXHOUHWXUQOLQH
12.
OPERATOR
'
S MANUAL
- Included in plastic bag (co-pack). Read before operation and keep in a safe place for
IXWXUHUHIHUHQFHLHRSHUDWLRQPDLQWHQDQFHVWRUDJHDQGVSHFL¿FDWLRQV
12
D
ESCRIPTION
1
4
7
8
9
10
2
7
11
6
5
5
3
CONTENTS
1- Power Head
1- Blower Pipe Assembly
1- Plastic Bag
1- Operator's Manual
1- Assembly Tool (s)
