14
O
PERATION
3URYLGHDOORSHUDWRUVRIWKLVHTXLSPHQWZLWKWKH2SHUDWRUV0DQXDO
and instructions for safe operation.
IMPORTANT
&KHFNXQLWIRUORRVHQXWVEROWVDQGVFUHZVGDLO\
IMPORTANT
Recoil starter: Use short pulls - only 1/2-2/3 of rope length for
starting. Do not allow the rope to snap back in. Always hold the
XQLW¿UPO\
STARTING
COLD
ENGINE
1. Move ignition switch to START/RUN position.
2. Move throttle lever to IDLE position.
3. Push purge bulb 3-4 times (or until fuel is visible in fuel return
line).
4. Close choke (move choke lever up) and pull starter handle until
HQJLQH¿UHV
2SHQFKRNHDQGLIQHFHVVDU\UHVWDUWHQJLQH
NOTE
Allow engine to warm up before use.
STARTING
WARM
ENGINE
1. Move throttle lever to IDLE position.
0RYHLJQLWLRQVZLWFKWRVWDUWSXOOVWDUWHUKDQGOHWLPHVDQG
engine should start. Do not use choke.
NOTE
,IHQJLQHGRHVQRWVWDUWDIWHUSXOOVXVHFROGVWDUWSURFHGXUHV
STOPPING
ENGINE
1. Release throttle trigger and allow engine to run at idle for a few
minutes.
2. Move throttle lever to IDLE position.
3. Move ignition switch to "STOP" position.
WARNING DANGER
,IHQJLQHGRHVQRWVWRSVKLIWFKRNHOHYHUWRFORVHGSRVLWLRQ
Check and repair ignition switch before starting engine again or
serious personal injury may result.
START/RUN
STOP
Throttle trigger
Ignition
switch
Starter
handle
Choke
lever
Throttle lever
Throttle lever
Ignition
switch
Purge
bulb