MAINTENANCE
LC-56V1A
12
X7508310900
© 5/23 ECHO Incorporated
2.
Re-insert battery into charger. If LED shows any status other than
blinking red, battery is good. If LED blinks red, remove battery from
charger and unplug charger from outlet.
3.
Wait one minute, then plug charger back into outlet and put battery
back into charger. If LED shows any status other than blinking red,
battery is good. If LED blinks red, battery is defective and must be
replaced.
Examine the Charger
If the battery does not charge correctly:
1.
Test outlet by plugging a different appliance into it.
2.
Assure that charger contacts are not short-circuited.
3.
If the charger is not located within normal room temperature, move
charger and battery to a location that conforms with temperatures listed
in table. .
If charging is attempted in an environment that’s too hot or too
cold, charger LED will turn red. Remove battery and allow
temperature to regulate for approximately 30 minutes.
MAINTENANCE
Maintenance and Care
• Clean housing and the plastic components with a dry and soft cloth.