VxD console- Mia and MiaMIDI
72
We have provided a software switch in the Mia/MiaMIDI driver that allows you to
select which format Mia/MiaMIDI transmits. In the window that appears you’ll see
a pair of check boxes in an area labeled
S/PDIF Out Format
: one box is labeled
Consumer
and the other
Professional
. Select the appropriate format for your DAT
(if you don’t know which one to use and are having difficulties, simply try the one
that is not currently checked). Mia/MiaMIDI never transmits the SCMS bit;
regardless of which format is selected.
Digital I/O - Dither Input
In the top right is a checkbox labeled
Dither Input
. This checkbox allows you to
enable or disable dithering on the digital inputs. It is off by default. Most of the
time you will want to leave this setting disabled. The only time you will want to
use dithering is when you are receiving a 24-bit signal over the digital inputs, but
you want to record it as a 16-bit wave file. In this case, dithering will improve the
audio quality.
General - Sync Wave Devices
This is mainly for developers who are using tools like Visual Basic or Delphi and
want the inputs and outputs to be totally independent. Unless you have a good
reason to turn it off, you should leave this switch on.
If you have a program that is telling you that our hardware isn't full duplex,
chances are you can fix this by either disabling this switch or enabling
Multi-client
audio
(see “Additional Configuration Settings” below).
VxD console – Mia and MiaMIDI
