Console – Mia
37
Console – Mia
Clock and digital mode settings
: The area within the
yellow
outline on the
upper right lets you select your sync source and digital mode. If a given
clock is detected, the green indicator next to the clock button will light up.
You will only be allowed to select clocks that have been detected. Also,
you may only select the digital mode if the there aren’t any applications
actively playing or recording.
Note:
Sample rates above 48kHz will not be available while ADAT mode
is selected. This is because ADAT does not support sample rates higher
than 48kHz.
Menus
You can set your S/PDIF output format by selecting File/Preferences. This
lets you configure your card for professional or consumer format S/PDIF
output. Some S/PDIF devices need to see one format or another; if you are
having trouble connecting a S/PDIF device to the digital output of your
Echo card, try changing this setting.
The “Active Card” menu is used when you have more than one Echo card;
use this menu to switch between the different cards.
Shortcuts
Shift-drag
: Holding down the Shift key and dragging a fader will invert the
current gang state. If a fader is ganged, shift-dragging will treat the fader
as if it were unganged and vice versa.
Quick 0 dB
: Holding down the Command key and clicking on a fader will
set that fader to 0 dB.
Center pan
: Holding down the Command key and clicking on a pan slider
will set the slider to the center position.