background image

4

OPERATOR SAFETY

• Read this Trimmer Operator’s Manual carefully.

Be sure you understand how to operate this unit
properly before you use it.

• If you have any questions or problems, please contact

your ECHO dealer.

• Be familiar with all the controls and the proper use of

the machine.

• Wear proper clothing to protect legs and other

exposed parts of your body.

• Wear non-skid sole shoes. Do not wear open-toed

shoes or operate unit while bare footed.

• Wear eye and hearing protection devices.

• Use caution when handling fuel. Put the caps back

tightly on both the fuel can and the trimmer fuel tank.
Move at least 3 m from the re-fuelling point and be
sure there is no leakage of fuel from the fuel tank cap
or the fuel system before starting the engine.

• Do all cutting at full throttle speed. Cutting at less at

than full speed can damage the clutch by allowing it
to slip.

SAFETY

   WARNING

TRIMMER USERS RISK INJURY TO
THEMSELVES AND OTHERS IF THE TRIMMER IS
USED IMPROPERLY, AND/OR SAFETY
PRECAUTIONS ARE NOT FOLLOWED. PROPER
CLOTHING AND SAFETY GEAR MUST BE WORN
WHEN OPERATING TRIMMER.

• Start the unit on the ground with the throttle set at

idle. Do not start if the blades are obstructed by the
ground or any other object.

• Inspect area that trimmer will be used in. Remove

stones, metal objects and any other object that could
jam or damage the trimmer.

• Never allow children to use the machine.

• Do not allow anyone to hold the material you are

cutting.

• Keep a firm grip on the trimmer with both hands, one

hand on the front handle, the other hand on the rear
handle.

• Operate this petrol engine powered equipment in a

well-ventilated area only.

   DANGER

ALWAYS STOP THE ENGINE WHEN A BLADE
JAM OCCURS. DO NOT ATTEMPT TO REMOVE
AN OBJECT CAUSING A BLADE JAM IF THE
ENGINE IS RUNNING. PHYSICAL INJURY CAN
OCCUR IF A BLADE JAM IS REMOVED AND THE
BLADES START MOVING.

   WARNING

USE A FIRM GRIP WITH THUMBS AND FINGERS
ENCIRCLING THE HANDLES. A FIRM GRIP WILL
HELP YOU KEEP CONTROL OF THE TRIMMER.
NEVER OPERATE THE TRIMMER ONLY ONE
HAND OR BODILY INJURY CAN OCCUR.

• Always carry the trimmer with the engine stopped and

the HOT silencer away from your body.

3 m

Содержание HCR-161ES

























Отзывы: