20
1. Remove muffler cover.
2. Remove starter cover and clean dirt and dust from fins.
IMPORTANT
DO NOT use a metal scraper to remove dirt from the cylinder fins.
3. Assemble components in reverse order.
exhausT
sysTem
Spark Arrestor Screen
Level 2.
Tools required:
4 mm Hex wrench, Cross Head Screwdriver, Soft
metal brush
Parts required:
Screen, Gasket
1. Remove muffler cover.
2. Place piston at Top Dead Center (TDC) to prevent carbon/dirt from
entering cylinder.
3. Remove exhaust guide (A), gaskets (B), and screen (C) from muf
-
fler body.
4. Clean carbon deposits from muffler components.
NOTE
When cleaning carbon deposits, be careful not to damage the cata
-
lytic element inside muffler.
5. Replace screen if it is cracked, plugged or has holes burned through.
6. Assemble components in reverse order.
A
B
C
Содержание HC-185
Страница 31: ...Hedge Clipper 31 Operator s Manual notes ...