background image

H

edge

 C

lipper

O

peratOr

'

s

 M

anual

3

InternatIonal

 

symbols

s

afety

manual

 

safety

 

symbols

 

and

 

Important

 

InformatIon

 

Throughout this manual and on the product itself, you will find safety alerts and helpful, informational messages pre

-

ceded by symbols or key words.  The following is an explanation of those symbols and key words and what they mean 

to you.

Symbol 

description/application

Symbol form/shape

Symbol 

description/application

Symbol form/shape

Hot 

Surface

Carburetor adjustment

- Idle speed

Carburetor adjustment

- High speed mixture

Symbol 

description/application

Symbol form/shape

Symbol 

description/application

Symbol form/shape

Read and understand  

owners manual.

Wear eyes, ears and 

head protection

Emergency stop

Fuel and oil mixture

Finger Severing

Carburetor  adjustment

- Low speed mixture

Safety/Alert

Avoid all power 

lines. This unit is not           

insulated against 

electrical current.

Do not operate closer 

than 15 M (50 ft.) from 

electrical hazards.      

Plan retreat 

path from falling                 

objects.

Wear hand protection. 

Use two handed.

DO NOT smoke 

near fuel.

DO NOT allow 

flames or sparks 

near fuel.

Wear slip resistant 

foot wear.

Ignition

Ignition

ON/OFF

Do not operate with-

out guards in place.

Keep bystanders at least 

4.5 meters (15 feet) away.

Primer bulb

Choke Control 

"Cold Start"  

Position 

(Choke Closed)

Choke Control 

"Run"  

Position 

(Choke Open)

   WARNING

The safety alert symbol accompanied by the word 

“WARNING” calls attention to an act or condi-

tion which CAN lead to serious personal injury or 

death if not avoided.

CIRCLE AND sLAsH syMbOL

This symbol means the specific action 

shown is prohibited. Ignoring these prohi-

bitions can result in serious or fatal injury.

   CAUTION

The safety alert symbol accompanied by the word 

“CAUTION” calls attention to an act or condition 

which may lead to minor or moderate personal 

injury if not avoided.

NOTE

This enclosed message provides tips for use, care and 

maintenance of the unit.

IMPORTANT

The enclosed message provides information neces-

sary for the protection of the unit.

   DANGER

The safety alert symbol accompanied by the word 

“DANGER” calls attention to an act or condition 

which WILL lead to serious personal injury or 

death if not avoided.

Содержание HC-155

































Отзывы: