4
P/N 89031744530
Shaft Decal
• This unit can be dangerous and cause serious injury if improperly
used. To reduce injury risk to operator, helpers and bystanders, read
and understand the Operator's and Safety manuals.
• Blindness can occur from objects that are thrown or ricocheted even
with shield in place. Operators, helpers and bystanders must wear
ANSI Z87.1 approved eye protection.
• Always wear hearing protection when operating unit.
• Prevent accidental contact with unit and any cutting attachment.
Maintain a 15m (50 ft.) radius, DANGER ZONE surrounding the
operator. ONLY the operator, dressed in proper protective clothing
should be in the DANGER ZONE.
• DO NOT INSTALL METAL BLADES ON GT (GRASS TRIMMER)
MODELS.
• Cutting attachment does not stop immediately after releasingthrottle.
Keep hands and feet clear of blade/cutting attachment unless engine
is shut off and cutting attachment is not moving.
WARNING
DANGER
WEAR HAND AND
FOOT PROTECTION
KEEP BYSTANDERS AND HELPERS
AWAY 15 M (50 FT.).
DO NOT USE
BLADES. STRING
LINE ONLY
DO NOT EXCEED
10,000 RPM.
DO NOT OPERATE
WITHOUT GUARDS
AND SHIELDS IN
PLACE.
BEWARE
- THROWN,
RICOCHET
OBJECTS
SYMBOL
DESCRIPTION/APPLICATION
SYMBOL FORM/
SHAPE
SYMBOL
DESCRIPTION/APPLICATION
SYMBOL FORM/
SHAPE
HOT
SURFACE
CARBURETOR
ADJUSTMENT
- IDLE SPEED
CARBURETOR
ADJUSTMENT
- HIGH SPEED
MIXTURE
SYMBOL
DESCRIPTION/APPLICATION
SYMBOL FORM/
SHAPE
SYMBOL
DESCRIPTION/APPLICATION
SYMBOL FORM/
SHAPE
Read and understand
Operator's Manual.
WEAR EYES, EARS
AND HEAD
PROTECTION
EMERGENCY STOP
FUEL AND OIL
MIXTURE
FINGER SEVERING
CARBURETOR
ADJUSTMENT
- LOW SPEED MIXTURE
SAFETY/ALERT
DO NOT SMOKE
NEAR FUEL.
DO NOT ALLOW
FLAMES OR
SPARKS NEAR
FUEL.
WEAR SLIP
RESISTANT
FOOT WEAR.
IGNITION
ON/OFF
PRIMER
BULB
INTERNATIONAL
SYMBOLS
CHOKE CONTROL
"COLD START"
POSITION
(CHOKE CLOSED)
CHOKE CONTROL
"RUN"
POSITION
(CHOKE OPEN)
