Installing
Tracktion
NOTE 1:
If you can’t find some of your Echo product’s inputs or outputs, that
means they are currently being used by another software program. You will
have to shut down Tracktion, and disable them from the other software
program. Most commonly, this is because you selected one of your Echo
products’ output devices as the default playback device for Windows. If this is
the case, then you will need to change the default playback device from the
“Sounds and Audio Devices” control panel in Windows.
NOTE 2:
If you have several different Echo products and you want to use them
simultaneously in Tracktion, you need to synchronize them first or else audio
will not playback properly. Refer to “Synchronizing Multiple Devices” in the
“Console3” section of this manual for more information.
5. Make sure one of your Echo product’s outputs is the “default wave output”, and
that it is hooked up to some speakers or headphones. You can check this setting
on the right side of the “Settings – Audio devices” screen of Tracktion.
6. Now you’re ready to play some music. Click on the “Projects” tab at the top of
the screen and select one of the sample projects that come with Tracktion.
7. You will see a listing of all the files for that project in the large area to the right.
Double-click on the file with the same name as the project. This will open the
project.
8. Now click on the play button in the bottom right section of the screen and you’ll
hear the sample project with your new Echo product.
9. Enjoy the music!!
There are more detailed instructions for Tracktion in the HTML “User’s Guide”
which is available by hitting the F12 key while in Tracktion. You can also find
hints and tips in the Tracktion user’s forums available through the Tracktion
webpage here:
http://www.mackie.com/products/tracktion/
This completes the installation of the hardware and software for Layla3G and
Gina3G.
20
Installing Tracktion
