Connecting to the Audio Interface
Connecting to the Audio Interface
The Layla3G and Gina3G audio interfaces contain a wide variety of connections
that allow great flexibility in operation. For optimal performance, it is critical to
use the appropriate cabling and connectors.
Analog Inputs and Outputs – Layla3G
Layla3G’s front panel has two universal inputs (#s 1 – 2) with meters and trim
knobs, a phantom power switch and light (+48v), and an amber power indicator
light. There is also a ¼” headphone output jack, with a corresponding volume
knob, which monitors analog outputs 1 and 2.
Layla3G has six analog line inputs (#s 3 – 8) and eight analog line outputs on the
rear panel. These analog inputs (#s 3 – 8) operate with an input impedance of
10Kohms. The input and output connections can be used with balanced or
unbalanced cables via the ¼” connectors. By default, the inputs and outputs are set
to receive or send a +4dBu signal. You can switch b4dBu and –10dBV
for each individual input and output via the console software (see section below).
There are also two channel inserts on the rear panel where you can connect a serial
effects device (compressor, EQ, etc.) for the universal inputs (#s 1 – 2).
12
Connecting to the Audio Interface
