manualshive.com logo in svg

Echo EDR-260, Руководство оператора

Поделиться
Скачать
Echo EDR-260 Скачать руководство пользователя страница 8

6

1

DESCRIPTION

1. Operator’s manual - Included with unit. Read

before operation and keep for future reference
to learn proper, safe operating techniques.

2. Throttle trigger - Device activated by the

operator’s finger, for controlling the engine
speed.

3. Rear handle - Handle located furthest from the

drill bit.

4. Silencer cover

5. Drill bit - Not included with unit.

6. Chuck

7. Front handle - Handle located on the front

gear case.

8. Shift lever

9. Fuel tank - Contains fuel and fuel filter.

10. Fuel tank cap - For closing the fuel tank.

11. Air cleaner cover - Covers air filter.

12. Starter handle - Pull handle to start the engine.

13. Throttle trigger lockout - Device that prevents

the accidental operation of the throttle trigger
until manually released.

14. Ignition switch - Device for allowing the

engine to be started and stopped.

15. Spark plug

2

3

4

12

11

10

8

7

6

5

9

14

15

13

Part Number 890160-06361

* If a decal cannot be read, a new one can be

ordered from your ECHO dealer.

Part Number 890160-06361

Part Number X503-004600

Part Number X503-004600

 

Содержание EDR-260



















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды