manualshive.com logo in svg

Echo EDR-260, Руководство оператора

Поделиться
Скачать
Echo EDR-260 Скачать руководство пользователя страница 16

14

CLEANING SILENCER AND
EXHAUST PORT
(Check Periodically)

1. Carefully remove housing halves.

2. Remove and disassemble silencer.

NOTE

Be careful not to scratch the cylinder or piston
when cleaning the cylinder exhaust port.

3. Clean deposits from cylinder exhaust port and

silencer.

ADJUSTING CARBURETOR
(As Required)

GENERAL INFORMATION

The idle speed adjuster screw controls the throttle
opening at the idle position.

IDLE ADJUSTMENT

1. Start engine and allow it to run at high idle until

warm.

2. Turn the idle speed screw clockwise until drill

bit begins to move.

3. Turn idle screw counterclockwise 1 and 1/2 to 2

turn or until the drill bit stops (2,700 to 3,300
r/min).

CLEANING CYLINDER FINS
(Check Periodically)

NOTE

Clogged fins will cause poor engine cooling.

1. Carefully remove housing and clean dirt and

dust from fins.

2. Reinstall housing.

Idle speed adjustment screw

Cylinder fins

Silencer

Silencer cover

NOTE

When there is some trouble with the carburetor,
contact your dealer.

Содержание EDR-260



















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды