manualshive.com logo in svg
background image

11.The universal receiver must have a clear and unobstructed view 

of the transmitter to work properly. 12. When you are finished 

using  the  universal  receiver  turn  the  volume  fully  counter 

clockwise until the ON/OFF LED is off . 

13.Place the universal receiver back into the charging cradle.

14.The charge LED will turn RED and when the batteries are fully 

charged the charge LED will turn green again. The charging 

cradle power LED will always be red when connected to mains. 

This indicates that power is available for the receiver.

15.The receiver can also be recharge by plugging the 6VDC power 

lead directly into the receiver socket.

16.When the battery level is low, the ON/OFF LED will flash RED. 

Then after a few minutes the receiver will automatically turn off 

to protect the batteries. The receiver must be recharged if this 

occurs. 

17.There are no user serviceable parts in the universal receiver. Do 

not attempt to replace the batteries. Contact Hearing Products 

International Limited if you have any service issues.

18.Note: if the serial numbers or labels are removed your warranty 

is invalid.

7

Содержание EchoLink (IR)













Отзывы: